WSE-630(PNE30-630ADP)

Feature code：

Main characteristics:

●IGBT inverter technology
●Microcomputer control草紅 technology
●Welding parameter automati弟窗cally stores
●Five operating mode for AC Square 些玩wave TIG welding
●Parameters in panel are set by co行文ordinate-type touch key and 西他the single knob for adj喝子ustment
●Eight operating mode both for DC T校綠IG, DC pulse TIG
●AC Square Wave TIG / Pulse T銀數IG / DC TIG / Spot TI窗內G/MMA in this machine
●Mainly be used for weldin慢化g of aluminum, magnesium alu能問minum alloy and its alloys in醫河 the field of aviation,
●aerospace, air separation eq司區uipment, radiator, aluminum p妹子ipe, bicycle, pressure v房哥essel, furniture industry and so o志錢n
●Current output with Qu妹玩asi sinusoidal waveform;
●Welding cable can be lengt風好hened to 60 meters (automatically為哥 alarm when the cable上靜 wings on welding mode);
●Double welding func還著tion is optional;
●Foot switch is optional;
●Current displays effecti輛算ve value in AC TIG mode;
●Interface for the ala冷兵rm function of water s友玩hortage

Model	WSE-630
Company type	PNE30-630ADP
Rated input voltage(V)	3 phase 380V±(15~20)% 50~60Hz
Rated Input capacity 水吧(KW)	25.2
No-load voltage (V)	83±6%
Output current adjust得能ing range(A)	20～630
Pulse frequency (Hz)	0.5～200
Pulse ratio range	10%～90%
Slope up time (s)	0～10
Slope down time (s)	0～10
Spot time (s)	0.2～5
Pre-flow time (s)	0.1～1.5
Post-flow time (s)	1～15
Surge current range(M就但MA)	0.01～0.5
AC frequency (Hz)	20～70
AC balance	10%～50%
Duty cycle (40℃)	60%
Efficiency	≥85%
Power factor	0.93
Insulation grade	F
Case protection grade們靜	IP21S
Cooling	Wind
Dimensions (mm)	700×360×780
Net weight (kg)	72